Add:No.19 Lujiafan Road, Yuyao Industrial Zone, Yuyao City, Zhejiang, China

Tel:+86-574-62188716

E-mail: sun@shieldsealing.com

Home > Knowledge > Content
Apparent quality requirements for gasketed metal wound gaskets
Dec 26, 2018

    The surface of the metal wound gasket main body of the gasket is not allowed to have flaws, voids, irregularities and rust spots which affect the sealing performance. The non-metallic strip on the surface of the metal wound gasket should be evenly and appropriately raised beyond the metal strip. The texture between the layers should be clear, but the metal strip should not be exposed. The spacing of the solder joints of the metal wound gasket should be uniform, and there should be no defects such as unfusion or over-melting. The surface of the reinforcing ring shall be free from defects such as burrs, irregularities, rust spots, etc. The spacing between the upper and lower sealing surfaces of the metal wound gasket main body and the upper and lower surfaces of the reinforcing ring shall be equal. The inner side of the reinforcing ring and the metal wound gasket body shall be tightly fixed and shall not be loosened; The outer reinforcement ring and the gasket body should be positioned and loose.


Previous: Introduction to some applications and characteristics of PTFE gaskets

Next: Common graphite gasket features